Billets, blooms and ingots in stainless steels

Den här sidan finns enbart på Engelska (This page is only available in English)

The Alleima manufacturing portfolio of billets and blooms includes a wide range of stainless steels and nickel alloys. Several grades of Alleima stainless steel are available as Sanmac^®, stainless steel with excellent machinability and consistent properties for increased cutting speeds and reduced tool wear and shorter set-up times.

Technical data, such as chemical composition and mechanical properties, is found in the material datasheet for the respective grade.

Austenitic stainless steels
Alleima grade	UNS	ASTM	EN steel no.	Billets for forging and re-rolling		Extrusion billets	Blooms	Ingots
				Round	Square
Alleima® 6RA11	S30300	303	1.4305	■	■	-	■	■
Alleima® 5LR11	S30400	304	1.4301	■	■	-	■	■
Alleima® 6LR11	S30400	304	1.4301	■	■	■	■	■
Alleima® 4LR11	S30403	304L	1.4307	■	■	-	■	■
Alleima® 3R12	S30403	304L	1.4306	■	■	■	■	■
Alleima® 8LR30	S32100	321/321H	1.4541	■	■	-	■	■
Alleima® 6R35	S32100	321/321H	1.4541	■	■	■	■	■
Alleima® 6LR62	S31600	316	1.4401	■	■	■	■	■
Alleima® 5R60	S31600	316	1.4436	■	■	■	■	■
Alleima® 4LR61	S31603	316L	1.4404	■	■	-	■	■
Alleima® 3R65	S31603	316L	1.4404	■	■	■	■	■
Alleima® 3R60	S31603	316L	1.4435	■	■	■	■	■
Alleima® 3X1R63	S31703	317L	1.4438	■	■	-	■	■
Alleima® 3R64	S31703	317L	1.4438	■	■	■	■	■
Alleima® 8LR70	S31635	316Ti	1.4571	■	■	-	■	■
Alleima® 5R75	S31635	316Ti	1.4571	■	■	■	■	■
Alleima® 7RE10	S31008	310	1.4845	■	■	■	■	■
Alleima® 2RK65	N08904	904L	1.4539	■	■	■	■	■
Alleima® 254 SMO	S31254	-	1.4547	■	■	-	-	-
Sanmac^® 304/304L	S30400/ S30403	304/304L	1.4301/ 1.4307	■	■	-	■	■
Sanmac^® 316/316L	S31600/ S31603	316/316L	1.4401/ 1.4404	■	■	-	■	■
Sanmac^® 1.4435	S31603	316L	1.4435	■	■	-	■	■
Sanmac^® 1.4571	S31635	316Ti	1.4571	■	■	-	■	■
Sanmac^® 1.4541	S32100	321	1.4541	■	■	-	■	■

Duplex stainless steels (ferritic-austenitic)
Alleima grade	UNS	ASTM	EN steel no.	Billets for forging and re-rolling		Extrusion billets	Blooms
				Round	Square
Alleima 5RD58	S32900	329	1.4460	■	■	■	-
SAF ™ 2304	S32304	-	1.4362	■	■	-	-
SAF ™ 2205	S31803	-	1.4462	■	■	■	■
SAF™ 2507	S32750	-	1.4410	■	■	-	-
Sanmac^® 2205	S31803/ S32205	-	1.4462	■	■	-	■

Nickel alloys
Alleima grade	UNS	ASTM	EN steel no.	Billets for forging and re-rolling		Extrusion billets	Blooms
				Round	Square
Sanicro^® 28	N08028	-	1.4563	■	■	-	-
Sanicro^® 31HT	N08810/ 11	Alloy 800 HT	1.4959	■	■	-	-
Sanicro^® 32Cu	N08020	Alloy 20	-	■	■	-	-
Sanicro^® 41Cu	N08825	Alloy 825	2.4858	■	■	-	-
Sanicro^® 70	N06600	Alloy 600	2.4816	■	■	-	-

Ferritic and martensitic steels
Alleima grade	UNS	ASTM	EN steel no.	Billets for forging and re-rolling		Extrusion billets	Blooms
				Round	Square
Alleima 2XC24	S41000	410	1.4006	■	■	-	■
Alleima 6C27	S42000	420	1.4028	■	■	-	■
Alleima 12C27	S42000	420	-	■	■	-	■
Alleima 4C54	S44600	446	-	■	■	-	■
Alleima 0XC34	S43000	430	1.4016	■	■	-	■