Stainless steel hydraulic tubing

Hydraulic tubing and instrumentation tubing

Tube, pipe, fittings and flanges

Hydraulic tubes and instrumentation tubes in a comprehensive range of corrosion-resistant stainless steels and nickel alloys covering outside diameters from (OD) 1.59 to 50 mm (0.0625 to 1.968 in.). All sizes are supplied with smooth surfaces and close dimensional tolerances reducing the risk of leakages when connecting tubes with couplings.

Hydraulic tubing and instrumentation tubing

Standard delivery form for hydraulic and instrumentation tube from Alleima is straight lengths of 6 meters, but our tubes can also be delivered as coiled tubing, contributing to reduced installation costs.

Tubes with high cleanliness

Our hydraulic tubes and instrumentation tubes are characterized by high cleanliness, and tubes with OD larger than 5 mm (0.196 in.) can be delivered with plugged ends for transport protection against inside contamination.

The tables show Alleima's standard grades for hydraulic and instrumentation tubing. Other grades can be offered on request.

Duplex stainless steels
Alleima grade	UNS	ASTM	EN no.
SAF™ 2507	S32750	-	1.4410
SAF™ 2205	S31803/S32205	-	1.4462
SAF™ 2304	S32304	-	1.4362

Nickel alloys and high-alloy austenitic stainless steels
Alleima grade	UNS	ASTM	EN no.
Sanicro^® 70	N06600	Alloy 600	-
Sanicro^® 625	N06625	Alloy 625	2.4856
Sanicro^® 41	N08825	Alloy 825	-
Sanicro^® 35	N08935	-	-
Sanicro^® 30	N08800	Alloy 800	1.4558
Sanicro^® 28	N08028	-	1.4563
Alleima® 2RK65	N08904	-	1.4539
254 SMO *	S31254	-	1.4547
-	N04400	-	-
-	N02200	-	-

Austenitic stainless steels
Alleima grade	UNS	ASTM	EN no.
Alleima® 8R40	S34700/S34709	347/347H	1.4550/1.4912
Alleima® 5R75	S31635	316Ti	1.4571
Alleima® 3R65	S31603/S31600	316L/316	1.4404/1.4401
Alleima® 3R60	S31603/S31600	316L/316	1.4435/1.4436
Alleima® 6R35	S32100/S32109	321/321H	1.4541/1.4940
Alleima® 3R12	S30403/S30400	304L/304	1.4306/1.4301

* 254 SMO is a trademark of Outokumpu OY.

Standards

Alleima® 3R12 and Alleima® 3R60

EN 10216-5 TC1
ASTM A213-AW (average wall)
ASTM A269
PED 2014/68/EU
OD <6 mm according to A632
NACE MR0175/ISO 15156

Alleima® 5R75

EN 10216-5
PED 2014/68/EU

254 SMO (UNS S31254)

EN 10216-5 TC1
ASTM A269
PED 2014/68/EU
NACE MR0175/ISO 15156

Alleima® 2RK65 (UNS N08904)

EN 10216-5 TC1
ASTM A213 A269
PED 2014/68/EU
NACE MR0175/ISO 15156

Sanicro^® 28 (UNS N08028)

EN 10216-5 TC1
ASTM B668
PED 2014/68/EU
NACE MR0175/ISO 15156

Sanicro^® 60 (UNS N06625)

ASTM B444, Grade 1 and Grade 2
ASME SB444, Grade 1 and Grade 2
ISO 6207

SAF™ 2507 (UNS S32750)

EN 10216-5 TC1
ASTM A789
PED 2014/68/EU
NACE MR0175/ISO 15156

Tubes with OD up to and including 25,4 mm (1.0 in.) are supplied bright annealed. Tubes with OD larger than 25.4 mm are supplied in the annealed and pickled condition. Standard length = 6 meters.

For information about maximum working pressure for each size and grade, use our pressure calculation tool.

Stock standard items: C = Central warehouse (Europe)
OD mm	WT mm	Kg/m	Alleima® 3R12	Alleima® 3R60	Alleima® 5R75	Alleima® 254 SMO
3	0.5	0.03	-	C	-	-
3	0.7	0.04	-	C	-	-
6	1.0	0.13	C	C	C	C
6	1.5	0.17	-	C	C	-
8	1.0	0.18	C	C	C	-
8	1.5	0.24	C	C	C	-
8	2.0	0.30	C	C	-	-
10	1.0	0.23	C	C	C	-
10	1.5	0.32	C	C	C	C
10	2.0	0.40	C	C	C	-
12	1.0	0.28	C	C	C	C
12	1.5	0.39	C	C	C	C
12	2.0	0.50	C	C	C	C
14	1.0	0.33	C	C	-	-
14	1.5	0.47	-	-	C	-
14	2.0	0.60	C	C	C	-
15	1.0	0.35	C	C	-	-
15	1.5	0.51	C	C	C	-
15	2	0.65	C	C	C	-
16	1.0	0.38	C	C	-	-
16	1.5	0.54	C	C	C	-
16	2.0	0.70	C	C	C	-
16	2.5	0.85	-	C	C	-
18	1.0	0.43	C	C	-	-
18	1.5	0.62	C	C	C	-
18	2.0	0.80	C	C	C	C
18	2.5	0.97	-	-	C	-
20	1.5	0.69	-	C	C	-
20	2.0	0.90	C	C	C	-
20	2.5	1.09	-	C	C	-
20	3.0	1.28	-	-	C	-
22	1.5	0.77	C	C	C	-
22	2.0	1.00	C	C	C	-
25	1.5	0.77	C	-	-	-
25	2.0	1.15	C	C	C	C
25	2.5	1.41	C	C	C	-
25	3.0	1.65	-	C	C	-
28	1.5	0.88	C	C	C	-
28	2.0	1.15	-	C	C	-
28	2.5	1.60	-	C	-	-
30	2.5	1.72	-	C	-	-
30	3.0	2.03	C	C	C	-
30	4.0	2.60	-	C	C	-
35	2.0	1.65	C	C	C	-
35	2.5	2.03	-	-	C	-
35	3.0	2.40	-	C	-	-
38	2.0	1.80	-	C	-	-
38	3.0	2.63	C	C	C	-
38	4.0	3.41	-	C	C	-
38	5.0	4.13	-	C	C	-
42	2.0	2.00	-	C	C	-
42	3.0	2.93	-	C	C	-
50	5.0	5.63	-	C	-	-

OD = outside diameter
WT = wall thickness

Alleima® 3R60, OD <6 mm, tolerances according to ASTM A632
Size OD, mm	Tolerances OD, mm	Wall thickness %
<4.76-2.38	+0.08/-0	+/- 10

Alleima® 3R60, 3R12, 5R75, OD 6-42 mm EN 10305-1
Size OD, mm	Tolerances OD, mm	Wall thickness %
6-30	+/-0.08	+/-10
32-40	+/-0.15	+/-10
42	+/-0.20	+/-10

Alleima® 254 SMO
Size OD, mm	Tolerances OD, mm	Wall thickness %
6-25	+/-0.13	+/-10

Tubes with OD up to and including 1.0 in. (25.4 mm) are supplied bright annealed. Tubes with OD larger than 1.0 in. are supplied in the annealed and pickled condition. Standard length = 6 meters.

For information about maximum working pressure for each size and grade, use our pressure calculation tool.

Stock standard items: C = Central warehouse (Europe)
Imperial size¹⁾	OD mm	WT mm	Kg/m	Alleima® 3R12	Alleima® 3R60	Alleima® 2RK65	SAF™ 2507	Sanicro^® 28	Sanicro^® 60	254 SMO*
1/16" x 28 BWG	1.59	0.36	0.011	-	C	-	-	-	-	-
1/16" x 25 BWG	1.59	0.51	0.014	-	C	-	-	-	-	-
1/8" x 22 BWG	3.18	0.71	0.044	-	C	-	-	-	-	-
1/8" x 20 BWG	3.18	0.89	0.051	-	C	-	-	-	-	-
3/16" x 20 BWG	4.76	0.89	0.086	-	C	-	-	-	-	-
1/4" x 22 BWG	6.35	0.71	0.100	-	C	-	-	-	-	-
1/4" x 20 BWG	6.35	0.89	0.122	C	C	C	C	-	C	C
1/4" x 20 SWG	6.35	0.91	0.124	C	C	C	-	-	-	-
1/4" x 18 SWG	6.35	1.22	0.157	-	C	C	-	-	-	-
1/4" x 18 BWG	6.35	1.24	0.159	-	C	C	C	-	C	C
1/4" x 16 SWG	6.35	1.63	0.193	-	C	C	-	-	-	-
1/4" x 16 BWG	6.35	1.65	0.194	-	C	C	C	-	C	-
5/16" x 20 BWG	7.94	0.89	0.157	-	C	-	-	-	-	-
5/16" x 20 SWG	7.94	0.91	0.160	-	C	-	-	-	-	-
3/8" x 20 BWG	9.53	0.89	0.193	-	C	C	C	-	C	-
3/8" x 20 SWG	9.53	0.91	0.196	-	C	C	-	-	-	-
3/8" x 18 SWG	9.53	1.22	0.264	-	C	C	-	C	-	-
3/8" x 18 BWG	9.53	1.24	0.257	-	C	C	C	C	C	-
3/8" x 16 SWG	9.53	1.63	0.322	-	C	C	-	C	-	-
3/8" x 16 BWG	9.53	1.65	0.326	-	C	C	C	C	C	C
3/8" x 14 SWG	9.53	2.03	0.381	-	C	-	-	-	-	-
3/8" x 14 BWG	9.53	2.11	0.391	-	C	-	-	-	C	-
1/2" x 20 SWG	12.7	0.89	0.263	-	C	C	C	-	C	-
1/2" x 20 BWG	12.7	0.91	0.268	-	C	C	-	-	-	-
1/2" x 18 SWG	12.7	1.22	0.350	C	C	C	-	-	-	-
1/2" x 18 BWG	12.7	1.24	0.356	C	C	C	C	-	C	-
1/2" x 16 SWG	12.7	1.63	0.452	C	C	C	-	C	-	-
1/2" x 16 BWG	12.7	1.65	0.456	C	C	C	C	C	C	C
1/2" x 14 SWG	12.7	2.03	0.542	-	C	C	-	-	-	-
1/2" x 14 BWG	12.7	2.11	0.559	-	C	C	-	-	C	C
5/8" x 18 SWG	15.88	1.22	0.448	-	C	-	-	-	-	-
5/8" x 18 BWG	15.88	1.24	0.454	-	C	-	-	-	-	-
5/8" x 16 SWG	15.88	1.63	0.582	-	C	-	-	-	-	-
5/8" x 16 BWG	15.88	1.65	0.588	-	C	-	-	-	-	-
3/4" x 18 SWG	19.05	1.22	0.544	-	C	-	-	-	-	-
3/4" x 18 BWG	19.05	1.24	0.553	-	C	-	C	-	-	-
3/4" x 16 SWG	19.05	1.63	0.711	-	C	-	-	-	-	-
3/4" x 16 BWG	19.05	1.65	0.718	-	C	-	-	-	-	-
3/4" x 14 BWG	19.05	2.11	0.895	-	C	-	-	-	-	-
3/4" x 13 BWG	19.05	2.41	1.00	-	C	-	-	-	-	-
3/4" x 12 BWG	19.05	2.77	1.13	-	C	-	-	-	-	-
1" x 18 SWG	25.4	1.22	0.739	-	C	-	-	-	-	-
1" x 18 BWG	25.4	1.24	0.750	-	C	-	-	-	-	-
1" x 16 BWG	25.4	1.65	0.981	-	C	-	-	-	-	-
1" x 14 BWG	25.4	2.11	1.23	-	C	-	-	-	-	-
1" x 13 BWG	25.4	2.41	1.39	-	C	-	-	-	-	-
-	25.4	3.20	1.78	-	C	-	-	-	-	-

SWG = Standard Wire Gauge, BWG = Birmingham Wire Gauge
OD = outside diameter
WT = wall thickness

Tolerances

Alleima® 3R60, OD <6 mm, tolerances according to ASTM A632
Size OD, mm	Tolerances OD, mm	Wall thickness, %
< 6–4.76	+0.10 / -0	+/-10
< 4.76–2.38	+0.08 / -0	+/-10
< 2.38	+0.05 / -0	+/-10

Alleima® 3R60, OD 6.35-25.4 mm according to EN 10305-1
Size OD, mm	Tolerances OD, mm	Wall thickness, %
6.35 - 25.4	+/-0.08	+/-10

Alleima® 2RK65 and Sanicro^® 28
Size OD, mm	Tolerances OD, mm	Wall thickness, %
≤ 25.4	+/-0.10	+/-10

SAF™ 2507 and Alleima® 254 SMO
Size OD, mm	Tolerances OD, mm	Wall thickness, %
≤ 19.05	+/-0.13	+/-10

* 254 SMO is a trademark owned by Outukumpu OY.

Alleima hydraulic and instrumentation tubing are tested according to the standards as follows.

Standard	Tests chemical analysis	Tensile	Hardness	Flattening	Flaring	Corrosion	Hydrostatic
EN 10216-5 TC1	S	S	-	S	S¹⁾	- ⁴⁾	T ²⁾
ASTM A269	S	-	S	-	S	- ⁵⁾	T ²⁾
ASTM A213	S ³⁾	S	S	S	S	- ⁵⁾	T ²⁾
ASTM A789	S ³⁾	S	S	-	S	-	T ²⁾
ASTM B668	S	S	- ⁶⁾	-	S	-	T ²⁾
ASTM A632	S	S	- ⁶⁾	-	S	- ⁵⁾	T

S = Sampling, T = 100%

1) Either flaring or flattening test depending on tube size.
2) Eddy Current or hydrostatic test at option of Alleima.
3) Also product analysis of a billet or tube from each heat.
4) Alleima performs EN ISO 3651-2 Method A.
5) Alleima performs ASTM A262 PrE.
6) Alleima performs hardness test.

Alleima stainless hydraulic tubes and instrumentation tubes can also be delivered in coils, contributing to reduced installation cost due to:

Fewer connections
Higher degree of materials utilization
Improved system integrity

Metric sizes - standard sizes

(other sizes and lengths can be offered on request)

OD mm	WT mm	Single coil length, m	Orbital welded length, m
3.0	0.5	400	-
3.0	0.75	400	-
3.0	1.0	400	-
3.5	0.5	400	-
3.5	0.75	400	-
3.5	1.0	350	-
3.5	1.5	280	-
4.0	0.5	350	-
4.0	0.75	350	-
4.0	1.0	300	-
4.0	1.5	230	-
6.0	1.0	594	10,828
6.0	1.0	515	9,399
6.0	1.5	440	8,021
8.0	1.0	424	7,734
8.0	1.2	364	6,635
8.0	1.5	304	5,553
10.0	1.0	330	6,016
10.0	1.2	281	5,127
10.0	1.5	233	4,246
10.0	2.0	182
12.0	1.0	270	4,922
12.0	1.2	229	4,177
12.0	1.5	188	3,437
12.0	2.0	146

OD = outside diameter
WT = wall thickness

Imperial sizes - standard sizes

(other sizes and lengths can be offered on request)

Size, in.	*Single coil length, ft**	Orbital welded length, ft
1/8 x .020	1,300	-
1/8 x .028	1,300	-
1/8 x .035	1,300	-
1/8 x .049	1,300	-
3/16 x .020	1,000	-
3/16 x .028	950	-
3/16 x .035	750	-
3/16 x .049	600	-
1/4 x .035	2.005	36,551
1/4 x .049	1.528	27,864
1/4 x .065	1.256	22,903
3/8 x .035	1.267	23,100
3/8 x .049	941	17,162
3/8 x .065	749	13,661
3/8 x .083	612	11,345
1/2 x .035	927	16,899
1/2 x .049	681	12,411
1/2 x .065	534	9,740
1/2 x .083	427	7,949
5/8 x .035	446	13,313
5/8 x .049	325	9,711
5/8 x .065	253	7,565
5/8 x .083	203	6,112
3/4 x .035	367	10,990
3/4 x .049	266	7,982
3/4 x .063	207	6,187

*Minimum guaranteed length for ASTM 316/316L.

Standards

ASTM	A213, A269, B163, B167, B668, A632, A789, A790
ASME	SA213, SB163, SB167, SB668, SA789, SA790
NACE	MR 0175
EN	10216-5 TC1

Eddy Current or hydrostatic test at option of Alleima.

Tubes with high cleanliness

Standards

Tolerances

Imperial sizes - standard sizes

Standards

Need to know more? We're here to help