Material datasheets

A molybdenum-alloyed austenitic stainless steel with improved machinability.

Solid Bar

Sanicro^®625 is an extremely versatile nickel-chromium-molybdenum-niobium alloy, suitable for use in severely corrosive environments requiring high strength materials.

Service temperatures ranging from cryogenic to 593°C (1100°F).

Sanbar^® 61 is a high strength silicon steel with good toughness and impact resistance in the as-rolled condition.

A martensitic stainless chromium steel which after hardening is characterized by very high hardness and wear resistance and good corrosion resistance. Alleima® 12C27 is typically used for knives and skate blades.

An austenitic CrNi stainless steel used as a base material for Alleima® coated strip steel. Alleima® 15R10 strip steel is particularly suited to many types of electric load carrying spring applications, such as contact springs and tactile domes.

A hardened and tempered carbon steel with very high tensile strength used for pad printing applications.

A martensitic stainless chromium steel with low carbon content that after hardening is characterized by good corrosion resistance and high toughness. The grade is typically used for shaving heads in electric shavers and various kitchen tools.

A martensitic stainless steel alloyed with molybdenum that after hardening is characterized by very good corrosion resistance and high toughness. The grade is typically used for cutters in electrical shavers and springs.

A hardened and tempered martensitic stainless steel alloyed with molybdenum. Alleima® 7C27Mo2 flapper valve steel is characterized by very high fatigue strength, good flatness and wear resistance.

A precipitation hardening stainless steel specifically designed for applications requiring high strength combined with good ductility in the final product. The grade has good tempering effect.

A hardened and tempered carbon flapper valve steel with high fatigue strength, good flatness and wear resistance.

Sanprint™ EP is a hardened and tempered carbon steel used for printing doctor blade applications. The grade is a standard martensitic steel, particularly suitable for non water-based and UV inks.

Sanprint™ EPS is a hardened and tempered chromium steel used for printing doctor blade applications. The grade is a standard martensitic stainless steel, suitable for all types of ink.

Alleima® 10C28Mo2 is a martensitic stainless chromium steel developed for razor blade and knife applications with high demands on corrosion resistance. The carefully chosen chemical composition in combination with a very fine microstructure also provides a high hardness, good edge retention, toughness and edges that are easy to re-sharpen.

A ferritic stainless steel with minimum 16% chromium that has lower tensile strength, elongation and impact resistance than austentic stainless steels. The proof strength is somewhat higher.

A high-alloy austenitic stainless steel characterized by very good resistance to general corrosion in sulphuric, phosphoric and acetic acid as well as very good resistance to pitting corrosion and stress corrosion cracking.